Kapaċità Teknoloġija - Trijanglu tad-Deheb PCB & Teknoloġiji Co, Ltd
  • Phone: 86-0755- 85275761
  • E-mail: sales@gtpcb.com

    Kapaċità teknoloġija

    riġidi
    deskrizzjoni kapaċitajiet
    1.Prodott Medda 2-30L (HDI: 1 + N + 1; 2 + N + 2)
    ħxuna 2.Board 0.2mm-7.0mm
    3.Copper Foil Inner: 6oz, barra: 4oz
    tolleranza ħxuna 4.Board " +/- 10% - + / - 8%
    5.Material FR4, KB, PTFE, ROGERS, Arlon, Isola, TACONIC, IT180, Nelco
    trattament 6.Surface Hasl, hasl ċomb ħielsa, OSP, Kisi deheb (1u "-50u") ENIG (1u "-8u") Saba Deheb (1u "-50u") fidda immersjoni, Tgħaddis Landa (0.8-1.5um)
    7.Size ta 'prodott lest Min: 10 * 10mm, Max: 1200 * 500mm
    8.Min. mekkaniku f'toqob & kuxxinett Toqob: 0.2mm / kuxxinett: 0.4mm
    9.Min Laser toqob tat-tħaffir & kuxxinett 0.1mm, kuxxinett <0.1mm
    10.Min. tolleranza toqba +/- 0.05mm (NPTH), +/- 0.075mm (PTH)
    11.Min ħxuna ram tal holes'wall 20um
    spazju 12.Min ta 'toqob tat-tħaffir għall konduttur  0.15mm (<8L); 0.2 (8 <14); 0.225mm (<= 24L)
    13.Min. wisa konduttur / ispazju 0.075 / 0.075mm (3 / 3mil)
    Daqs 14.Min tal istann PAD / Annulus Kuxxinett: 0.4mm / 0.3mm (xibt Laser), Annulus: 0.1mm
    ħajt 15.Hole li Innerlayers kondutturi ta b'ċirkuwitu 0.2mm
    16.Hole biex distakk tarf toqba 0.8mm
    17.Solder maskra kulur & Ħxuna Kulur: aħdar, iswed, isfar, blu, aħmar, abjad, Matt Ħxuna aħdar: 10-20um
    kulur 18.Silk-iskrin Abjad, iswed, isfar
    tolleranza 19.Profile +/- 0.15mm (Rotot), +/- 0.1mm (ippanċjar)
    ispazju 20.Min minn konduttur / toqob tarf 0.15mm / 0.2mm
    21.Warp & twist  0.3% -0.7%
    22.Thickness ta peelablemask 0.2-0.5mm (Max toqob fejn jitwaħħal: 4.5mm)
    angolu 23.Bevel ta saba deheb 20,30,45,60 (Tolleranza: +/- 5 gradi)
    tolleranza 24.Impedance +/- 5ohm
    ħxuna bord 25.V CUT 0.6-3.0mm
    26. Max multi-istampa <= 3
    tolleranza 27.Min ta 'slot tħin +/- 0.15mm
    28.Ratio tal-bord ħxuna / toqob daqs 12: 1